Photo Sticker Printer - Liene Photo PixCut S1

Printer

The Liene PixCut S1 is a photo and sticker printer that can turn your custom images into stickers. Use the Liene Photo mobile app to create your own sticker sheet, using a library of templates or by uploading your own images. Then, the printer will cut them out for you! Sticker paper costs $0.75 per sheet.

Liene PixCut S1 photo sticker printer and cutter in box and showing how it's used

Basic Instructions

  1. Hold the printer's power button for 3 seconds.
  2. Connect to Bluetooth.
  3. Open the Liene Mobile App and tap the +.
  4. In the 4*7 sticker paper tab, under Print & Cut, select Canvas.
  5. Choose elements from the library or upload your own images.
  6. When ready, tap Make-it.
  7. Wait for the printer to finish completely.

Detailed Instructions

Note: You can download the Liene Photo mobile app on your own device and make an account, or use the iPad provided.

  1. Turn on the printer by holding down the power button for 3 seconds.
  2. Navigate to your device's Bluetooth settings and connect to "Liene Pixcut S1-90D3".
    • For iPad users: if you have an iPhone, you may Airdrop your images to the iPad by turning on Airdrop in the iPad settings app > General > Airdrop > Everyone for 10 minutes.
    • If you don't have airdrop, you will have to email the images to yourself and access them through the iPad's browser. Make sure to log out of everything afterwards!
  3. Open the Liene photo app, and tap the + at the bottom.
  4. In the 4*7 sticker paper tab, under Print & Cut, select Canvas.
  5. Once a blank canvas appears, you can add whatever you like using the buttons at the bottom. If you have your own images to add, tap Upload to pull up the iPad's camera roll.
    • Note that the app can remove backgrounds of images for you automatically using AI. You can do this manually through the app as well.
  6. After you add an image, you can scale, free rotate, duplicate, and change the layer.
  7. When ready, tap Make-it in the top-right corner. Ensure the layout is correct, then tap Cut.
  8. Wait for the printer to completely finish before grabbing your sheet.